The SMART D-ZOOM function becomes active only after exiting the camera
menu.
NEGATIVE
IMAGE
Display the video image as a negative.
D-ZOOM Zoom factor setting after detecting motion in the configured
area.
TIME Duration of the automatic digital zoom. Afterwards, full-
screen mode is reactivated.
STANDARD Reset all settings made to the SMART D-ZOOM function.
MOTION The camera's internal motion detection is integrated into the processor platform
by default. This camera type does not have an interface (e.g. alarm output) to
allow this function to be used.
AREA
SELECTION
(1~4)
Selection of area (max. four)
AREA DISPLAY
(ON/OFF)
Activate/deactivate the preview frame. The position and
size of the area can be changed using the ENTER button.
SENSITIVITY
(0~100)
Sensitivity for motion detection.
MOTION
INDICATION
(OFF/ON)
A mark is displayed in the corresponding area in the live
view when motion is detected.
STANDARD Reset all settings made to this function.
PRIVATE ZONES This function allows private zones to be set up in the video image to protect areas
that are not to be monitored.
AREA
SELECTION
(1~8)
Selection of an area for the configuration
(ON/OFF)
Activate/deactivate the preview frame. The position and
size of the area can be changed using the ENTER
button.
TRANSPARENCY
(0~3)
Intensity of the colour display (transparency)
MOTION
INDICATION
(OFF/ON)
A mark is displayed in the corresponding area in the live
view when motion is detected.
STANDARD Reset all settings made to this function.
To Next Page
Loading...
