121
Focus
The camera focuses automatically after restarting or after operating the zoom function.
However, the focus can also be adjusted manually afterwards, this is done directly on the live view page. This
manually set focal point is then set again even after the camera is restarted, because the camera has saved
this point.
Day and night switching
Day/Night Switch
Day/Night Switch provides options for “Auto”, “Day” and “Night”.
Auto
Depending on the light conditions, the camera switches between day and night mode automatically. The
sensitivity can be set between 0 and 7.
Day
In this mode, the camera only outputs colour pictures.
Please note:
Onl
use this mode if the li
ht conditions remain constant.
Night
In this mode, the camera only outputs black/white pictures.
Please note:
Onl
use this mode if the li
ht conditions are poor.
Schedule
Sensitivity
Setting for the switching threshold for automatic day/night switching (0–7).
A lower value means that there is a lower lighting level for switching to night mode.
Delay time ("filter time")
Setting a delay time between recognising that a switching is required and carrying out the process.
Smart IR (“Intelligent additional light")
This function can reduce the cross-fade of the video image, in the event that light is reflected from nearby
objects.
Additional lighting mode
Depending on the model type, you will have the options "IR light" or "white light". The integrated lighting can
also be completely deactivated.
Light brightness control
The general intensity of the lighting can be set.
Auto: Automatic control with maximum value.
Manual: Fixed manual setting
Backlight Settings
WDR
With the aid of the WDR function, the camera can return clear pictures even in disadvantageous backlight
conditions. If there are both very bright and very dark areas in the picture area, the brightness level of the
overall picture is balanced to provide a clear, detailed image.
To Next Page
Loading...
Need help?
General
