– 37 –
10 min
Cause: Temperature alarm
Silencing the alarm sounds
All alarm sounds can be temporarily
deactivated by pressing the Test
Stop button (Fig. 1, item d) (smoke
alarm and temperature alarm:
10 min.).
Indication sounds:
A single tone is issued every 90
seconds (short beep).
Volume:
Cause:
Low battery warning
If the smoke alarm issues one of the two
indication sounds described above, the
device will remain capable of providing
its warning function for a maximum of
60 days and must therefore be replaced
before this remaining 60-day period
expires.
Indication sounds:
A double tone is issued every 90
seconds (short beeps).
Volume:
Cause: Device is contaminated
Silencing the
indication sounds:
All indication sounds can be tempo-
rarily deactivated by pressing the
Test/Stop button (Fig. 1, item d)
(low battery and contamination
indications: 24 hours).
90 seconds
24 h
90 seconds
GB
To Next Page
Loading...
