If smoke is detected, a loud, pulsing alarm tone sounds and the red LED flashes
at the same time at short intervals. In this case, proceed as described in the
“Behaviour in case of alarm” chapter.
4.7. Alarm muting function (hush mode)
If the detector is in the alarm state, the acoustic alarm can
be deactivated for 10 minutes by pressing the Test button.
If the muting function is active, the red LED flashes every
10 seconds.
If smoke is still detected in the smoke measurement
chamber after the 10-minute muting period, the acoustic
alarm will sound again.
5. Overview of functions
5.1. Inclusion / Add Device
Slide the base unit from the mounting plate
and remove the safety strip from the battery
compartment
Click the + (Add) button in your Z-Wave App
and follow the further instructions
To Next Page
Loading...
