Abus SHRM10000 - Funktionsprinzip; Performance Features; Use in Systems of Different Manufacturers; 4 Selecting Location

7
English
Nr
Label
Comment
1
Sound outlet opening
2
Smoke inlet opening
3
Network button
For inclusion / exclusion of the detector in a Z-Wave
gateway, factory reset and tamper alarm
4
Test/hush Button
Control Light (LED)
The control light is located under the Test/hush button
and shines through it
5
Detector base
With mounting holes
3.3. Funktionsprinzip
The SHRM10000 was developed for use in home automation systems that use the Z-
Wave wireless standard. The detector alarms loudly thanks to the integrated siren (>
85dB). When the battery level is low, the detector automatically gives feedback to the
gateway.
In conjunction with configurable scenes, smart functions can also be initiated in
addition to the alarm, e.g. smoke detector triggers, front door unlocks for emergency
services.
3.4. Performance Features
The ABUS Z-Wave SHRM10000...:
- …is a battery-operated radio smoke detector
- …is Z-Wave PLUS compatible & certified
- …supports the Z-Wave S2 Standard (Security 2)
- …reliably detects smoke development
- …alerts in case of fire via loudspeaker and alarm message to the gateway
- ... has a battery-empty warning function
- …was developed for indoor installation
3.5. Use in systems of different manufacturers
Communication is via the Z-Wave EU frequency (868.42 Mhz). You can integrate the
device into any Z-Wave network with a certified Z-Wave gateway, regardless of
manufacturer. All non-battery powered nodes in the network act as repeater to increase
the durability of the network.
4. Selecting location
c
c
c