6.2 Power supply
Before starting installation, ensure that the power supply system voltage and the rated voltage of the camera
are identical.
(1) Video signal (BNC)
(2) Power supply
12 V DC (5.5 x 2.1 mm)
The cameras have a 12 V DC power supply. Ensure correct polarity when connecting them. A plug-in power
supply unit (round plug, 5.5 mm x 2.1 mm) is provided for the connection.
6.3 Installing the video cable
In order to transmit the video signal to a converter, monitor, or recorder, a coaxial cable of type RG59 with
BNC plug (male) must be connected to the “Video OUT” connection. The cable length to the next device may
not exceed 150 meters. To increase the range, you can install suitable signal repeaters.
To Next Page
Loading...
