31
English
1
In the eld “New password” enter a
password for the admin user.
The password must meet the specied
minimum requirements.
Recommendation: Use a password
that is as complex as possible and is
classied as “strong”.
2
Re-enter the password to conrm it.
Make a note of the password in the
quick-start guide as well and keep
it in a safe place. The admin password
can only be reset by ABUS technical
support.
3
You should also enter the activation
password for the cameras here. If you
activate a camera via the recorder,
the recorder uses this password for it.
Then click on “OK”. The device is now
activated and all of its functions can
be used.
Admin password:
SYSTEM ACTIVATION
To Next Page
Loading...
