6
PRODUCT REQUIREMENTS
The AIRCOM series is designed to cool various AV components by accelerating the intake of cool
air and outtake of heat. Please make sure that the following requirements are met to ensure the
cooling system will work effectively.
FULLY ENCLOSED CABINETS
The cooling system is not compatible with fully
enclosed cabinets. Air must be able to travel in
and out of the cabinet. Please make sure that
your cabinet has ventilation holes or is open at
the front or back.
REAR EXHAUST MODELS
For models containing blowers, AIRCOM
S6, S8, and T8, the cabinet’s ventilation
holes should be at the rear. The hot air that
the cooling system is exhausting should be
directed out of the cabinet through its rear
holes.
To Next Page
Loading...
