23
PROGRAMMING
MIST MODE
Your humidifier will actively run at the level set
here, regardless of the probe’s reading. The
MIST mode also serves as the level the other
modes will run in. Don’t set the level to zero or
the device will turn off when it’s triggered ON.
POWER MODE
Turns your humidifier ON or OFF. The LCD
screen will not display while it is off.
You must power your humidifier on before
adjusting settings in other modes.
HUMIDIFIER MODES
Tap one of the following buttons on the controller to access that button's programming mode:
POWER, MIST, AUTO (low humidity trigger), and TIMER (to OFF).
To Next Page
Loading...
