Need help?Do you have a question about the AC Infinity CLOUDFORGE and is the answer not in the manual?
General| Humidistat | Yes |
|---|---|
| Color | Black |
| Connectivity | Wi-Fi |
| Control | Mobile App |
| Features | Auto-shutoff |
| Material | Plastic |
Lists Cloudforge T3, T5, T7, T9 models and their UPC-A codes.
Essential safety precautions for fire, electric shock, and injury prevention.
Describes directional cap and tube for humidity distribution.
Highlights Swiss-made sensor for accurate humidity readings.
Details onboard controller with LED touch interface and UIS compatibility.
Lists the 4.5L humidifier and flexible hose for the T3 model.
Lists the 15L humidifier, pipes, nozzles, and elastic bands for the T7 model.
Lists common accessories like sensor probe, mount, extension cord, brush, and tie.
Instructions for filling the T3 humidifier tank with distilled water and a note about the central pipe.
How to swap the directional flow cap with a flexible hose for extended flow.
Guidelines for proper hose bending and slope to prevent water pooling and leakage.
Instructions for filling the T7 humidifier tank with distilled water.
How to attach pipes and choose nozzles for desired humidity distribution.
Instructions for extending humidifier reach using custom PVC pipes and elastic bands.
How to attach the flexible hose to the base for targeted flow.
Guidelines for proper hose bending and slope to prevent water pooling and leakage.
How to plug the sensor connector into the rear side jack and route the probe head.
Connecting the T3 humidifier to a UIS controller and plugging it into a power outlet.
Connecting the sensor to the jack below the display screen for the T7 model and using the probe mount.
Connecting the T7 humidifier to a UIS controller and plugging it into a power outlet.
Explains how the UIS platform connects and manages multiple grow devices.
Details on connecting humidifiers to the Controller 69 PRO and using the UIS extension cable.
Instructions for cleaning the humidifier reservoir and base with vinegar.
Specific instructions for cleaning the water filter on Cloudforge T3 models.
Explains controller interface, programming modes (AUTO, VPD, TIMER, CYCLE), and settings.
How to adjust temperature units, calibrate sensors, and set LEAF OFFSET.
Explains various alert icons for water level, fail-safe, auto mode, timer, VPD, and display lock.
Covers factory reset, controller lock, screen hide, and default value adjustments.
Brief overview of related products like grow tents and thermo-hygrometers.
Details warranty coverage, exclusions, and customer support contact information.
To Next Page
