15
STEP 3 — HOSE
Attach the flexible hose to the base for targeted flow.
ROUTING THE HOSE
Do not bend the hose in a U-shape. Doing so will result in water pooling, which will spill into
puddles and block humidity from emitting. This will also result in water flowing back into the base,
which can overflow it and cause leakage.
Dry the hose after each use.
In addition, make sure the hose is sloped upwards when routing it to your grow tent. Sloping the
hose downward will result in condensation building up in the hose. This may further result in water
dripping out and creating a puddle.
INSTALLATION
CLOUDFORGE T7
To Next Page
Loading...
