Need help?Do you have a question about the AC Infinity CLOUDFORGE T3 and is the answer not in the manual?
General| Model | CLOUDFORGE T3 |
|---|---|
| Coverage Area | 6 x 6 ft. Grow Tent |
| Noise Level | ≤ 35 dB |
| Control Interface | Digital touch control |
| Features | auto-shutoff |
| Compatibility | Compatible with AC Infinity |
| Material | Plastic |
Describes the directional cap, stretchable tube, or pipe and nozzles for various humidity distribution methods.
Details the Swiss-made thermal alloy sensor for accurate humidity detection and up-to-the-minute readings.
Explains the onboard controller with LED touch interface for humidity balance programming and app control.
Lists the components included with the CLOUDFORGE T3 humidifier model.
Lists the components included with the CLOUDFORGE T7 humidifier model.
Details common accessories provided for all CLOUDFORGE humidifier models.
Instructions for filling the humidifier tank with water, recommending distilled water.
Instructions for swapping the directional flow cap with the included flexible hose.
Instructions for filling the CLOUDFORGE T7 humidifier tank with water, recommending distilled water.
Details on attaching the pipe and selecting either an elbow or 5-way nozzle for humidity flow.
Guidance on using PVC pipes with elastic bands to extend the humidifier's reach.
Instructions for plugging the sensor probe into the rear jack and routing its head to desired areas.
Explains connecting the humidifier to a UIS controller using the included UIS extension cord.
Instructions on plugging the humidifier's power cord into an electrical outlet to power the unit.
Details on connecting the sensor probe and using the probe mount for cable management.
Explains connecting the humidifier to a UIS controller via the front side port using the extension cord.
Instructions on plugging the humidifier's power cord into an electrical outlet to power the unit.
Details on using the UIS M-M extension cord to connect the humidifier to a CONTROLLER 69 unit.
Instructions for unplugging the unit, removing the tank, and cleaning the base with a water and vinegar solution.
Details on cleaning the nebulizer with a brush and wiping the base dry to complete the cleaning process.
Explains the function of each button and the information displayed on the humidifier's controller screen.
Details the different operating modes: Power, Mist, Auto (low humidity trigger), and Timer (to OFF).
Explains the meaning of alert icons such as Water Level Low, Auto Mode Alert, and Display Lock Alert.
Instructions for performing a factory reset and locking/unlocking the controller to prevent changes.
Details on hiding the display screen and resetting current mode values to default or previous settings.
Description of the CLOUDLAB series grow tents designed for indoor plant cultivation.
Overview of CLOUDCOM series smart thermo-hygrometers for accurate temperature and humidity detection.
Details on CONTROLLER 69, the centerpiece of the Universal Infinity System for controlling grow environments.
To Next Page
