25
ADDING MORE LIGHTS
DAISY-CHAINING
Each of the included controller's ports can support up to 16 grow lights using a daisy-chain adapter
(not included). All grow lights chained together must be from the same series.
Plug the male end of the daisy-chain adapter into your device.
Connect your UIS controller to the daisy-chain adapter’s INPUT port using a M-M connector cord.
Using an extension cord, attach the daisy-chain adapter's OUTPUT port to another adapter's
INPUT port. You can also link the OUTPUT port to another UIS device to end the chain.
IN OUT IN OUT
To Next Page
Loading...
