Need help?Do you have a question about the acaia Orion and is the answer not in the manual?
Describes the capabilities and design of the Acaia Orion Bean Doser.
Explains the physical and digital interface components of the Acaia Orion.
Provides step-by-step instructions for the initial setup of the Acaia Orion.
Details basic operating procedures and principles for the Acaia Orion.
Information regarding the charging process and indicators for the Acaia Orion.
Instructions on how to calibrate the Acaia Orion for accurate measurements.
Covers fundamental actions such as turning the device on/off and managing presets.
Guide on how to define and save target weights for dosing.
Procedure for changing between different operating modes of the Orion.
Instructions for safely emptying the bean hopper of the device.
Details on how to operate the manual dosing function of the Acaia Orion.
Explains the functionality and operation of the automatic dosing mode.
Instructions for using the Acaia Orion as a smart industrial weighing scale.
Guide on how to enter and navigate the device's settings menu.
Details on adjusting dosing speed, zero tracking, key sound, and weighing units.
Information on device calibration procedures and firmware version.
Description of all physical buttons on the Acaia Orion and their functions.
Explanation of the meaning of different LED light indicators on the device.
Lists and explains various error codes that may appear on the Orion display.
Explains other display codes, such as those for update mode.
The Acaia Orion Bean Doser is a sophisticated device designed for precise, weight-based dosing of green or roasted coffee beans. It offers a blend of speed, accuracy, and user-friendly features, making it suitable for various coffee preparation needs.
The primary function of the Acaia Orion Bean Doser is to dispense coffee beans by weight. It can handle portions ranging from 5 grams up to a maximum of 3000 grams per dose, with an impressive accuracy of +/- 2 beans (approximately 0.5 grams). This precision is crucial for consistent coffee brewing and roasting.
The device operates with a fast weight-based on-demand dosing capability. For instance, it can dose 225 grams (1/2 lbs) in just 12 seconds and 20 grams in 3 seconds, all while maintaining a tight error margin of 2-3 beans. This speed makes it efficient for busy environments or high-volume dosing.
Beyond simple dosing, the Orion also functions as a smart industrial weighing scale. In its Weighing Scale Mode, it can measure weights up to 3000 grams, providing a versatile tool for various weighing tasks.
A notable feature is its Statistic Tracking System, which allows users to monitor statistical information such as the total number of doses or the total weight dispensed during a dosing session. This data can be valuable for tracking usage and optimizing workflows.
The Acaia Orion is designed for ease of use, incorporating an intuitive dial interface and multiple operational modes.
Initial Setup: Before first use, the bean hopper should be rinsed and cleaned. After drying, it attaches to the top of the unit. A container should be placed on the weighing platform to prevent accidental dispensing. The device is powered by connecting the power cord, and then coffee beans can be added to the hopper.
General Operation: To begin, ensure the weighing platform is clean. Turn on the Orion by pressing the Power button and place a container on the platform. The target weight can be set by short-pressing Power, adjusting the value with the Dial, and confirming with another short press of Power. Dosing starts by pressing the Dose button. If the display shows [CUP][rESEE ], it indicates that a container needs to be placed on the platform. Once a dose is complete, pressing Power returns the device to the dosing state.
Dial Interface: The new dial interface allows for easy access to different functions and three preset modes for storing target weights. Rotating the dial enables users to switch between presets or modes.
Dosing Modes: The Orion offers two main dosing modes:
To Next Page
[701 5E ] message will appear, requiring the user to dose again.[-E884 ]. To initiate the first dose, press Dose again. After removing a completed dose, the display will show [rERd4 ], indicating readiness for the next container. The pulse function is also available in this mode.Presets: The Orion allows for storing three desired weights as presets. For example, preset 1 could be 18g, preset 2 at 20g, and preset 3 at 35g. These values can be easily adjusted.
Empty Hopper Function: To empty the bean hopper, a long press of the Dose button initiates continuous dispensing. A short press of the Dose button stops the process. An 'E' indicator appears on the top left of the display during this operation.
Dosing Speed Settings: Users can adjust the dosing speed to prioritize either accuracy or speed. The available settings are:
PrEC (Precision): Default speed, high accuracy.FASt (Fast): Faster speed, default accuracy (227 grams in 12 seconds), recommended for doses of 100 grams or more.GrEEn (Green Bean): Default speed for green beans or light roast beans.Zero Tracking Setting: This function compensates for weight readout fluctuations at the zero point, improving scale usability. It can be set from 0.5d to 3d (where d is the division, e.g., 0.1g). 2d is generally recommended. Turning it off is not advised as zero indication can drift with temperature changes.
Key Sound Setting: Users can turn the beeping sound on or off.
Default Weighing Unit: The default unit can be set to grams (g) or ounces (oZ).
LED Indicators:
The Acaia Orion includes features and guidelines to ensure its longevity and accurate performance.
Battery Charge: The Charging indicator displays when the battery is charging and turns off when the charger is removed. It's important to note that the Orion ONLY charges with the AC-DC adapter included in the package and not with other USB-C chargers.
Calibration: For maintaining accuracy, the Orion can be calibrated. While in Weighing Mode and with the unit set to grams, rapidly press the Dose button until the display shows [CAL ] and then [ 500 ]. Place a 500-gram calibration weight on the platform, and the doser will execute the calibration. The display shows [-End- ] upon completion. Other calibration weights (100g, 1000g, 1500g, 2000g, 3000g) can also be used, but Acaia calibration weights or F1/F2 Class weights are recommended for highest accuracy.
Firmware Updates: The device includes an "About" setting that shows the current firmware version. Firmware can be updated using the Orion Updater application available on the Acaia website. If the Orion enters update mode (UPDREE) and no action is taken, it will automatically turn off and exit update mode after 1 minute and 30 seconds.
Error Codes: The Orion provides error codes to help diagnose issues:
Error 100: Code errorError 101: EEPROM errorError 102: AD read errorError 303: Unable to make zero point because initial weight exceeds limit (250% of capacity).Error 304: Calibration required in a stable environment.Error 802: Unable to tare because weight exceeds tare range.Error 803: Unable to tare due to unstable weight.Error 904: Password error (default is 0000).These features collectively ensure that the Acaia Orion Bean Doser is a reliable, accurate, and user-friendly tool for coffee professionals and enthusiasts alike.
General| Connectivity | Bluetooth |
|---|---|
| Increment | 0.1 g |
| Repeatability | ± 0.1 g |
| Battery | Lithium ion |
| Measuring Units | Grams |