Access HD DTA1080D User Manual

Rev. June 5, 2008 Access HD® is exclusively distributed by GXi International, LLC Page 1 of 2
CONNECTING YOUR DIGITAL CONVERTER BOX
Connect the antenna to the ANT IN jack on the back of the converter box.
Using the supplied RF Coax Cable, connect the RF OUT jack on the back of
the converter box to the ANTENNA IN jack on the back of your TV.
(NOTE: You may also connect converter box to TV with optional RCA Audio/Video Cables)
Connect the small end of the Power Supply to the DC IN jack on the back of the
converter box; and plug the other end into a power outlet or surge protector.
Turn ON the converter box and TV.
Set your TV to Channel 3 to match the default CH3 setting of the converter box.
Quick Start Guide
1
1
2
3
2
3
4
5

Access HD DTA1080D Specifications

General

Brand	Access HD
Model	DTA1080D
Category	TV Converter Box
Language	English

Summary

Connecting Your Digital Converter Box

Connect Antenna and Power

Connect the antenna to the ANT IN jack and the power supply to the DC IN jack.

Connect RF Coax Cable

Connect the RF OUT jack to the TV's ANTENNA IN jack using the supplied RF Coax Cable.

Power On and Set Channel

Turn on the converter box and TV, then set the TV to Channel 3.

Initial Setup Menu

Set Menu Language

Select your preferred language from the Initial Setup Menu options.

Set Time Zone

Choose your correct time zone to ensure accurate time display.

Auto Program Channels

Initiate channel scanning to find available digital broadcasts.