To Next PageTo Next Page
Need help?Do you have a question about the Access IS ATR110 and is the answer not in the manual?
General| Brand | Access IS |
|---|---|
| Model | ATR110 |
| Category | Barcode Reader |
| Language | English |
Details Access Ltd's warranty terms and conditions for the product.
Covers European EMC, FCC, and Canadian RFI compliance statements.
Explains how to physically connect the ATR110 device via RS232 or USB.
Details on how to mount the ATR110 device.
Discusses serial and USB connection types.
Details on installing the serial connection for the ATR110.
Guide for installing USB drivers for Windows.
Defines the standard data output format and symbology codes.
Details the raw data output format and symbology codes.
Information on configuring custom data formats and parameters.
Overview of the three operating modes: Dumb, Host, and Interactive.
Details the 'Dumb' mode operation for the ATR110.
Details the 'Host' mode operation for the ATR110.
Details the 'Interactive' mode operation for the ATR110.
Commands for setting up interface, baud rate, parity, and keyboard layout.
Commands for adding prefixes and suffixes to barcode data.
Commands to control the ATR's illumination settings.
Commands for configuring LED indicators and status LEDs.
Commands for controlling device LEDs and sounder behavior.
Commands for firmware updates, imager levels, and general development.
Commands for controlling device triggering and presentation modes.
Commands related to 'Good Read' and 'Bad Read' counters.
Details on HID input and output report structures for data communication.
A reference table mapping decimal and hexadecimal values to characters.
