To Next PageTo Next Page
Need help?Do you have a question about the Accu-Chek FastClix and is the answer not in the manual?
General| Brand | Accu-Chek |
|---|---|
| Model | FastClix |
| Lancet Depth Settings | 11 |
| Lancet Drum Capacity | 6 lancets |
| Compatibility | Compatible with Accu-Chek lancets |
| Blood Sample Size | Not applicable (lancing device) |
| Measuring Time | Not applicable (lancet device) |
| Memory | Not applicable (lancet device) |
| Battery | Not applicable (lancet device) |
| Data Transfer | Not applicable (lancet device) |
Set the lancing depth using the cap, with 1 for sensitive skin and 5 for thicker skin.
Pull off the cap, insert a drum with 6 lancets, ensure it's seated, and replace the cap.
Remove a test strip, ensuring the gold side faces the meter, and insert it without pressing buttons.
Push the test strip fully into the meter to turn it on, then touch the lancing device to the finger.
Poke the finger, squeeze gently for blood if needed, and apply blood to the yellow end of the test strip.
Pull the test strip to turn off the meter after obtaining the result and advance the lancet.
The lancet counter decreases with use; replace the entire drum when it reaches '1'.
Remove the cap, pull out the used lancet drum, and dispose of it safely in a sharps box.
Use all 6 lancets before changing drums, wash hands, do not share the device, and check battery status.
Always check the expiration date on the test strip bottle and do not use expired strips.
