Accu-Chek ACTIVE User Manual

008
8
ACCU-CHEK is a trademark of Roche.
Roche Diagnostics GmbH
68298 Mannheim, Germany
www.accu-chek.com
0 5241430001(02) – 2008-05
Blood Glucose Meter
Instructions for use
R4 406 – 3400
V6/1 – Man_05241430001_02_EN_148x105mm – Black
V6/2 – Man_05241430001_02_EN_148x105mm – Cyan
V6/3 – Man_05241430001_02_EN_148x105mm – Magenta
V6/4 – Man_05241430001_02_EN_148x105mm – Yellow
V6/5 – Man_05241430001_02_EN_148x105mm – PMS 5445
V6/6 – Man_05241430001_02_EN_148x105mm – PMS 327

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH

Summary

Getting to Know Your Accu-Chek Active Meter

Your Meter at a Glance

Key Features Overview

Provides a summary of the key functionalities and capabilities of the blood glucose meter.

Coding Your Accu-Chek Active Meter

Importance of Correct Coding

Explains the importance of using the correct code chip for accurate test strip compatibility and results.

Testing Blood Glucose

Preparing to Test Blood Glucose

Lists the necessary items and initial steps required before performing a blood glucose test.

Blood Glucose Testing Procedures

Covers turning on the meter, applying blood, and turning the meter off.

Checking Test Results and Symbols

Verifies test strip functionality and explains display symbols encountered during testing.

Notes and Evaluation for Blood Glucose Testing

Measuring Range and Error Sources

Defines the operational range and troubleshooting for implausible blood glucose test results.

Using the Meter as a Diary

Retrieving Results and Averages

Downloading Test Results

Checking Your Meter's Performance

Preparing for a Performance Check

Carrying Out a Performance Check

Error Sources During Performance Checks

Identifies potential causes of errors during performance checks and troubleshooting steps.

Changing the Battery

Procedure for Changing the Battery

Procedure for replacing the meter's battery, including precautions to preserve data.

Blood Glucose Testing for Multiple Patients

Testing Blood Glucose Procedures for Healthcare Professionals

Disinfecting the Meter

Procedures for disinfecting the meter, especially crucial for multi-patient use.

Measurement and Storage Conditions

Temperature and Humidity Requirements

Light and Interference Sources

Symbols, Problems, and Error Messages

Symbols Shown in the Display

Troubleshooting Problems and Error Messages

Troubleshooting common issues, problems, and error codes displayed by the meter.

Customer Support and Service

Information Service and Troubleshooting