107
Symbols, problems and error messages
12.2 Problems
The meter will not turn on.
You have not removed the protective lm from the
battery.
Remove the lm from the battery (see Chapter
2.3).
The battery is empty or there is no battery in the
meter.
Insert a new battery.
You have inserted the battery the wrong way
round.
Remove the battery and place it in the battery
compartment as specied.
The ambient temperature is low and the battery is
almost empty.
Ensure that the ambient temperature is between
+10 and +40 °C and wait for the meter to warm
up. Insert a new battery.
The electronics have become damp through
condensation.
Allow the meter to dry slowly.
The meter is defective.
Please contact your customer support and service
centre.
To Next Page
Loading...
