Accu-Chek ACTIVE User Manual

72
Checking your meter
7.2 Carrying out a performance check
1 Read the package insert which came with the
control solutions.
2 Take a test strip from the test strip container and
close it again immediately.
3 Hold the test strip so that the arrows printed on
it and the orange square face upwards.
4 Without bending it, gently push the test strip into
the test strip guide in the direction of the arrows
until you feel it lock into place.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH