Accu-Chek ACTIVE User Manual

17
Steps before testing
2.2 Checking the unit of measurement for blood glucose
Blood glucose results can be displayed in two differ-
ent units (mg/dL or mmol/L). Two different versions of
the same meter are therefore available. Please check
if your meter displays the unit you are accustomed to.
You can nd the unit of measurement that your meter
displays on the type plate on the back of your meter.
If you do not know which is the right unit for you, ask
your doctor.
The unit of measurement that your meter
displays cannot be changed. If the wrong unit
is printed on the type plate, please consult
your dealer or pharmacy. A wrong unit of
measurement could lead to test results being
misinterpreted.
Type plate

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH