To Next PageTo Next Page
What to do if the code on my Accu-Chek Performa Blood Glucose Meter doesn't match the test strips?
If the code number displayed on your Accu-Chek Blood Glucose Meter doesn't match the one on the test strip container, insert the correct code chip into the meter and test again.
What to do if the Accu-Chek Performa battery power is low?
If your Accu-Chek Blood Glucose Meter indicates low battery power, change the battery soon.
How to fix 'battery is almost out of power' message on Accu-Chek Performa?
If your Accu-Chek Blood Glucose Meter displays a message indicating that the battery is almost out of power, change the battery immediately. If the message reappears after replacing the battery, remove the battery again, press any button on the meter, and then reinsert the battery.
What to do if Accu-Chek Performa Blood Glucose Meter says test strip error?
If you receive a test strip error on your Accu-Chek Blood Glucose Meter, remove and reinsert the test strip. If the error persists, replace the test strip, especially if it appears damaged.
How to resolve electronic error on Accu-Chek Blood Glucose Meter?
If your Accu-Chek Blood Glucose Meter displays an electronic error, turn the meter off and then on again. Alternatively, remove the battery for 20 seconds and then reinsert it. After doing this, perform a blood glucose or control test.
What to do if I'm still unsure of the problem with my Accu-Chek Blood Glucose Meter after initial checks?
Repeat the control test with a new test strip. If problems persist with your Accu-Chek Blood Glucose Meter, call Roche.
What to do if Accu-Chek Performa result is not what I expect?
If your Accu-Chek Blood Glucose Meter test result doesn't match how you feel, repeat the blood glucose test. If the E-3 code still appears, or the second test result still does not match how you feel, perform a control test with the control solution and a new test strip. If the control result is within the acceptable range, review the proper testing procedure and repeat the blood glucose test with a new test strip. If the control result is not within the acceptable range, see Chapter 4, Understanding Out-of-Range Control Results.
What to do if Accu-Chek Performa Blood Glucose Meter shows temperature error?
If your Accu-Chek Blood Glucose Meter indicates a temperature error, move to an area with appropriate temperature conditions. Wait for 5 minutes, and then repeat the blood glucose or control test.
Why does my Accu-Chek Performa Blood Glucose Meter say not enough blood?
If your Accu-Chek Blood Glucose Meter indicates that not enough blood or control solution was drawn into the test strip, or if it was applied after the test had started, discard the test strip and repeat the blood glucose or control test.
Why won't my Accu-Chek Performa Blood Glucose Meter turn on?
If your Accu-Chek Blood Glucose Meter won't turn on or the display is blank, try inserting a new battery. Also, move the meter to a more temperate area. If the problem persists, contacting Roche may be necessary.
General| Sample Size | 0.6 µL |
|---|---|
| Test Time | 5 seconds |
| Meter Dimensions | 94 x 52 x 21 mm |
| Measurement Range | 0.6-33.3 mmol/L |
| Memory Capacity | 500 results |
| Battery Type | 1 x CR2032 lithium coin cell |
| Automatic Power Off | 90 seconds after last user action |
| Operating Humidity | 10 to 90% RH |
| Storage Conditions | 10% to 90% RH |
| Meter Weight | 59 g (with battery) |
Outlines the essential steps to prepare the Accu-Chek Performa meter before performing a blood glucose test.
Guides users through the process of setting the correct time and date on the meter for accurate results.
Provides a step-by-step guide on how to perform a blood glucose test using the Accu-Chek Performa meter.
Offers troubleshooting steps for addressing unusual or unexpected blood glucose test results.
Details the procedure for setting or adjusting the meter's time and date accurately.
Details how to set an alert for low blood glucose levels, helping users manage hypoglycemia.
Details the step-by-step procedure for performing a control test with the Accu-Chek Performa meter.
Explains the procedure for replacing the battery in the Accu-Chek Performa meter.
Lists and explains various display messages and error codes encountered with the meter.
