Accu-Chek Performa User Manual

43
1. Install the software according to the instructions.
WARNING
Individual patient results cannot be identified, so transferring data from meters used for multiple-patient
testing is NOT recommended.
Transferring Your Results to a Computer or PDA
You can transfer your stored results to a computer to track, identify patterns, and print.
Transferring Data Directly to a Computer or PDA Using Specialized Software and Infrared
Cable
2. To transfer the results to a computer, connect the infrared cable according to the instructions.
3. Run the software program and follow the instructions for data
transfer. Make sure the software is ready to accept data from
the meter.
4. With the meter off, press and hold both
and until 2 arrows
on the display alternately flash.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50705_05853397002_EN.indb 43 4/24/12 8:32 AM

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)