Accu-Chek Performa User Manual

54
NOTE
• The meter uses one 3-volt lithium battery, coin cell type CR2032. This battery can be found in many
stores. It is a good idea to have a spare battery available.
• Be sure the battery is inserted (+) side facing up.
• After the battery is changed, the meter automatically prompts a time and date confirmation when it is
turned on.
• All results remain saved in the memory.
Changing the Battery
1. Open the battery door on the
back of the meter by pushing
the tab in the direction of the
arrow and pulling the door up.
2. Remove the old battery.
3. Insert the new battery with the (+) side facing up.
4. Put the battery door back in place and snap it closed.
50705_05853397002_EN.indb 54 4/24/12 8:32 AM

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)