Need help?Do you have a question about the Accu-Chek Inform II and is the answer not in the manual?
General| Sample Size | 0.6 µL |
|---|---|
| Test Time | 5 seconds |
| Memory Capacity | 1000 test results |
| Display | LCD |
| Measurement Range | 10 to 600 mg/dL |
| Connectivity | Infrared |
| Sample Type | Capillary whole blood |
| Operating Temperature | 16 to 32°C (61 to 90°F) |
| Relative Humidity | 10 to 90% non-condensing |
Explains safety symbols, operator qualifications, and infection control measures.
Covers essential safety measures and requirements before performing a patient test.
Step-by-step guide for performing tests, managing IDs, strips, and interpreting results.
Guidance on performing control tests, confirming lot numbers, and understanding results.
Steps for performing linearity tests, confirming lot numbers, and understanding results.
Steps for performing proficiency tests, including sample ID, lot confirmation, and result review.
Details the initial setup process, menu overview, and configuration of various settings.
Guidelines for proper storage, shipping, and recommended cleaning/disinfecting methods.
Covers errors without messages, specific error codes, communication problems, and base unit issues.
Procedure to unlock download lockout and perform a meter reset if necessary.
To Next Page
