Accu-Chek Inform II User Manual

Introduction • 1
15
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
1 Introduction
1.1 Before you start
Intended use The Accu-Chek
®
Inform II test strips are for use with the
Accu-Chek Inform II meter to quantitatively measure
glucose (sugar) in venous whole blood, arterial whole
blood, heel stick neonatal, or fresh capillary whole blood
samples drawn from the fingertips as an aid in monitoring
the effectiveness of glucose control. The system is not for
use in diagnosis or screening of diabetes mellitus, nor for
testing neonate cord blood samples.
The Accu-Chek Inform II Blood Glucose Monitoring
System is intended for testing outside the body (in vitro
diagnostic use) and is intended for multiple patient use in
professional healthcare settings. This system should only
be used with single-use, auto-disabling lancing devices.
The multiple-patient use Accu-Chek Inform II Blood
Glucose Monitoring System will consist of:
■ Meter: Accu-Chek Inform II Meter
■ Test Strip: Accu-Chek Inform II Test Strip
■ Controls: Accu-Chek Inform II Control Solutions
■ Linearity: Accu-Chek Linearity Kit

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing