Accu-Chek Inform II User Manual

94
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
6.2 Storing control solution information
Glucose control solution lot information can be entered
before testing, if lot editing has been allowed at the meter
level in the setup, and appears in a list for operators to
refer to. Use the following procedure to add glucose
control lot numbers to the Control Lot list.
Entering the lot number of the
control solution
The following description assumes that the meter is
powered on and the Main Menu is displayed.
1 Touch to open the Main Menu 2 screen.
2 Touch Control Lots to open the related menu.
3 Touch Add to enter a new lot number.
Main Menu
Review Results
Control Test
Patient Test
12:48 pm
03/17/17
Main Menu 2
Maintenance
Strip Lots
Profi ciency
Control Lots
Beeper
Linearity
Diagnostics
Linearity Lots
Admin.
12:48 pm
03/17/17
Control Lots
Add
* QC L2 05/21/17 777678
06/31/17 777732
05/21/17 777723
QC L1
QC L2
Type Exp. Date Lot Num.
12:48 pm
03/17/17

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing