Accu-Chek Inform II User Manual

Proficiency Testing • 8
115
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Inserting test strips After confirming the test strip lot, a flashing green arrow
appears on screen and prompts you to insert the test
strip.
1 Remove the test strip from the test strip vial and
close the vial with the cap.
2 Hold the test strip so the lettering “ACCU-CHEK” is
facing upward.
3 Slide the test strip into the test strip port as far as it
will go in the direction indicated by the arrows on
the test strip.
The meter beeps. The hourglass icon appears and indi-
cates that the meter is checking the test strip. Do not
apply the proficiency sample while it is displayed.
Profi ciency Test
Sample 123456789
Strip L
ot 545794
12:48 pm
03/17/17
Profi ciency Test
Sample 123456789
Strip L
ot 545794
12:48 pm
03/17/17

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing