Accu-Chek Inform II User Manual

200
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
RF specific functionalities and
effective performance claims
The Accu-Chek Inform II system offers the option of wire-
less network connectivity (WLAN/Wi-Fi). If you purchase
a system with this option, the WLAN function is enabled
during production.
This module can only be configured by a data manage-
ment system (DMS), which activates the meter’s wireless
communication and data transfer capabilities. Wireless
connectivity can help to ensure that updates to informa-
tion in the DMS are sent immediately to all networked
meters.
Meters with an integrated and activated wireless option
use the base unit for recharging and/or as a redundant
communication option to exchange data with the DMS.
The meter also has to be docked if the hospital changes
security protocols. When this change occurs, it may lock
out all meters until docked and reconfigured with the
new protocol.
As described above, the Accu-Chek Inform II meter
supports the 802.11g standard. This translates into the
following RF specific performance claims:

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing