Accu-Chek Inform II User Manual

Introduction • 1
21
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Disposal of the system
Product safety Observe the following information to ensure product
safety:
■ The system is suitable for continuous operation.
■ The system is not protected against the harmful
ingress of fluids (IP X0 rating according to
IEC 60529).
WARNING
Avoidance of electrical shock, fire, and explosions
■ Only use Roche original accessories (cables, power
supply units, battery packs, and spare parts). Third-
party cables, power supply units, and battery packs
can cause the battery pack to explode or the meter to
become damaged.
■ Do not use loose power sockets or damaged power
supply units, cables, plugs, or battery packs.
■ Do not short circuit the power supply unit, the base
unit charging contacts, or the battery pack.
■ Do not drop the Accu-Chek Inform II meter, the power
supply unit, or the battery pack and protect these
against shaking and vibrations.
WARNING
Infection by a potentially biohazardous instrument
The Accu-Chek Inform II system or its components must
be treated as potentially biohazardous waste. Decontam-
ination (i.e., a combination of processes including clean-
ing, disinfection and/or sterilization) is required before
reuse, recycling, or disposal.
Dispose of the system or its components according to the
appropriate local regulations or your facility policy. For
more information, contact Accu-Chek Customer Care.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing