EasyManuals Logo

Accu-Chek Inform II User Manual

Accu-Chek Inform II
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Local Area Network: protection
from unauthorized access
If this product is connected to a local area network, this
network must be protected against unauthorized access.
In particular, it must not be linked directly to any other
network or the Internet. Customers are responsible for
the security of their local area network, especially in pro-
tecting it against malicious software and attacks. This
protection might include measures, such as a firewall, to
separate the device from uncontrolled networks as well
as measures that ensure that the connected network is
free of malicious code.
Wired network connection If connected to a local area network, the Accu-Chek
Inform II Base Unit or Accu-Chek Inform II Base Unit Hub
must be protected against unauthorized access by means
of a strong password management. For additional
information about the Accu-Chek Inform II Base Unit or
Accu-Chek Inform II Base Unit Hub, refer to the
Accu-Chek Inform II Base Unit Hub Operator’s Manual or
the “Technical Note” stored on the Accu-Chek Inform II
Base Unit as a PDF file (see page 178 of this manual).
Or contact Accu-Chek Customer Care for technical
assistance.
Observe your own facility guidelines on password
management where available, or apply the following
rules:

Table of Contents

Other manuals for Accu-Chek Inform II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Accu-Chek Inform II and is the answer not in the manual?

Accu-Chek Inform II Specifications

General IconGeneral
Sample Size0.6 µL
Test Time5 seconds
Memory Capacity1000 test results
DisplayLCD
Measurement Range10 to 600 mg/dL
ConnectivityInfrared
Sample TypeCapillary whole blood
Operating Temperature16 to 32°C (61 to 90°F)
Relative Humidity10 to 90% non-condensing

Related product manuals