Accu-Chek Inform II User Manual

Introduction • 1
17
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
If you need help Information about using the system, the screen menus and
performing a test can be found in this operator's manual.
Error messages that appear on screen include informa-
tion or instructions on how to correct the error.
For all questions about the Accu-Chek Inform II
system that are not answered in this manual, contact
the Accu-Chek Customer Care Service Center at
1-800-440-3638 24 hours a day, 365 days a year. In order
to expedite troubleshooting, please have ready your
Accu-Chek Inform II meter, its serial number, this manual,
and all related consumables when you call. If you suspect
a communication error beyond the meter, also have your
Accu-Chek Inform II Base Unit serial number ready to
help assist our customer care group in troubleshooting.
Note on the use of “base unit” in
this manual
Note on illustrations in this
manual
Unless otherwise specified, the term “base unit” refers
to both the Accu-Chek Inform II Base Unit and the
Accu-Chek Inform II Base Unit Light.
Illustrations in this manual show two different kinds of
hands:
Hand without glove Hand with glove
A dashed arrow between screen illustrations indicates
that some screens have been skipped in these
illustrations.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing