Accu-Chek Inform II User Manual

Glucose Control Testing • 4
73
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
4.2 Performing glucose control tests
Overview of test procedure A glucose control test using control solution comprises
the following steps:
■ Select the desired level of control solution for the
test.
■ Check the lot number of the control solution.
■ Check the lot number of the test strips.
■ Perform the test with the control solution.
The result must fall within the specified range (as shown
on the label of the test strip vial or defined per configura-
tion) for the control test to be completed successfully.
Patient tests can now be performed (again).

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing