Accu-Chek Inform II User Manual

Proficiency Testing • 8
117
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Results screen The hourglass icon indicates the test is running. When
the test is completed and the result is ready, the meter
beeps again.
The result is displayed as a numerical value, unless it falls
outside the system measurement range. In this case, the
message Hi or Lo is displayed.
You can add comments to a test result (as with blood
glucose tests) (see page 65).
If you do not wish to add a comment to the test results,
touch to complete the test and store the result.
Remove the test strip and dispose of it in accordance with
applicable regulations and directives for disposal of
potentially infectious samples and materials.
Profi ciency Test
HI
Sample 123456789
Date 03/17/17 12:48 pm
12:48 pm
03/17/17
Profi ciency Test
150
Sample 123456789
Date 03/17/17 12:48 pm
mg/dL
12:48 pm
03/17/17
Profi ciency Test
LO
Sample 123456789
Date 03/17/17 12:48 pm
12:48 pm
03/17/17
Test results are saved automatically if the meter is pow-
ered off or if it powers itself off after 10 minutes of inac-
tivity/no screen touches (see “Automatic power-off” on
page 22).

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing