Accu-Chek Inform II User Manual

40
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
1.10 Instructions for initial setup
The meter must be configured prior to initial use. During
this setup, the following parameters are configured:
■ Date and time format
■ Input mode for Patient ID
■ Input mode for Operator ID
■ Glucose controls: Type and schedule
■ Results screen for glucose control
■ Comments for entry after a test
■ Settings for data transfer
You can perform these settings on a limited basis directly
in the Setup Menu of the meter. For more information
about configuration using the Setup Menu, see
Chapter 9, as well as Appendix A. In addition to this
option, the meter can be configured using a data man-
agement system. Suitable data management systems
provide a range of functions for configuring the meter
that go beyond what is possible with the meter-based
configuration feature.
For questions about using data management systems,
contact Accu-Chek Customer Care (see Chapter 12).
To ensure standardized configuration within a facility,
the meter-based Setup Menu may be disabled.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing