Accu-Chek Inform II User Manual

88
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Transferring code key
information to the meter
The following description assumes that the meter is pow-
ered on and the Main Menu is displayed.
1 Touch to open the Main Menu 2 screen.
2 Touch Strip Lots to open the related menu.
3 Touch Add if you want to add the information for a
new test strip lot from a new code key. The Add
Strip Lot screen opens.
4 Insert the new code key into the opening of the
code key reader. The LED starts flashing green and
signals that the reader is ready to transfer data.
Main Menu
Review Results
Control Test
Patient Test
12:48 pm
03/17/17
Main Menu 2
Maintenance
Strip Lots
Profi ciency
Control Lots
Beeper
Linearity
Diagnostics
Linearity Lots
Admin.
12:48 pm
03/17/17
Strip Lots
Add
Strip
06/31/17 855732
* 05/21/17 845678
Strip 06/21/17 845723
Type Exp. Date Lot Num.
Strip
12:48 pm
03/17/17
The code key reader remains ready to send for a few
seconds after it has transmitted data. As a result, you
can perform the following procedure on multiple meters
without having to reinsert the code key.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing