Accu-Chek Inform II User Manual

58
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Patient identification
information
All available patient ID information for the selected
patient is displayed on the Patient Test screen. Additional
patient identifiers such as name and date of birth help
verify patient identity. When performing a test, the operator
can easily check whether the gender and age of the
patient match the patient details shown on the screen.
The display cycles (every second) between displaying
patient ID and (if available) patient name. In a second line
the date of birth (DOB) is displayed. If no DOB is available,
a dash (-) is shown instead. See illustrations below.
Patient Test
Patient John Doe
Strip L
ot 545794
12:48 pm
03/17/17
DOB: 12/05/70
Patient Test
Patient 123456789
Strip L
ot 545794
12:48 pm
03/17/17
DOB: 12/05/70
Patient Test
Patient John Doe
Strip L
ot 545794
12:48 pm
DOB: 12/05/70
03/17/17
Patient Test
Patient 123456789
Strip L
ot 545794
12:48 pm
DOB: 12/05/70
03/17/17
The DOB is not displayed on the patient test result
screens, stored test results, or OTE test screens.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing