Accu-Chek Inform II User Manual

Patient Glucose Testing • 3
67
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Additional Patient Test It is possible to enable a patient test series (e.g. for plau-
sibility checks). If this function is enabled (only possible
via DMS), a pop-up dialog allows the operator to perform
another test for the same patient immediately after the
first test result is displayed. This function is also available
for OTS and OTE workflows.
Patient Test
Range
150
Patient 123456789
Date 03/17/17 12:48 pm
mg/dL
12:48 pm
03/17/17
D-531: Perform additional
Patient Test for Patient ID
123456789?
Additional Patient Test

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing