Accu-Chek Inform II

32
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
1.3 System components
The Accu-Chek Inform II system includes the following
components and accessories:
A Meter
B Code key reader
C Base Unit/Base Unit Light (power supply units not
shown)
D Base Unit Hub
E Accessory box
The meter can be configured by tw
o different methods:
1 Configuration via the Setup function on the meter
(see Chapter 9)
2 Configuration via data management system
Note: Not all options can be configured using the Setup
function on the meter.
The meter performs the following tasks within the system:
■ Serves as the primary operator interface through
the touchscreen and on/off button
■ Performs glucose tests
■ Scans barcodes (test strip lots, controls, patient and
operator IDs) in a variety of supported formats
■ Displays test results from patient tests and control
tests
■ Transfers stored data to the data management
system via wireless communication (WLAN,
optional) or the Accu-Chek Inform II Base Unit
(LAN)
A
C
E
D
B