Accu-Chek Inform II User Manual

Initial Startup • 9
137
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
9.9 Options for glucose control tests
This menu contains options that allow you to specify
whether and at what intervals glucose control tests are
performed. If you require control tests, check your set-
tings for STAT tests (see page 134).
1 Touch the desired option to enable it:
■ Control Frequency
– Always OK: QC Lockout is disabled, patient tests
can be performed at any time. This applies regard-
less of the result of running glucose control tests.
– Last QC OK: QC Lockout is activated only when the
last glucose control test is out of range or a control
test is not available (e.g., when changing the test
strip lot).
– Hours: QC Lockout is activated after the specified
time. When a glucose control test is run success-
fully, the counter is reset to “0”.
– Strip Count: QC Lockout is activated after reaching
the specified number of tests. When a glucose con-
trol test is run successfully, the test strip counter is
reset to “0”.
QC Frequency
Control Frequency
Last QC OK
Alw
ays OK
Strip Count
Hours
Rotating QC
Shift
Time Of Day
12:48 pm
03/17/17
123
456
789
0
QC Hours
50
12:48 pm
03/17/17
123
456
789
0
QC Strips
50
12:48 pm
03/17/17

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing