Accu-Chek Inform II User Manual

136
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
On the second settings screen, you can select options for
handling lot numbers with glucose control and linearity
tests.
1 Touch the desired option to enable it:
■ Control Lot Verification
– Display only: The lot number is shown on screen but
the operator cannot confirm it or select a different
lot number.
– Confirmation: The operator must confirm the lot
number displayed and can enter alternative lot
numbers manually or via barcode scanner.
– Lot entry: The operator must enter the lot number.
– Scan only: Lot numbers can be verified via barcode
scanner only.
■ Linearity Lot Verification
– Display only: The lot number is shown on screen but
the operator cannot confirm it or select a different
lot number.
– Confirmation: The operator must confirm the lot
number displayed and can enter alternative lot
numbers manually.
– Lot entry: The operator must enter the lot number.
2 Touch to save the settings (for both settings
screens),
or
touch to return to the first settings screen.
Reagent Options
Control Lot Verifi ca
tion
Confi rmation
Display only
Scan only
Linearity Lot Verifi cation
Display only
Confi rmation
Lot entry
Lot entry
12:48 pm
03/17/17

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing