Accu-Chek Inform II User Manual

142
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
9.13 Creating a setup password
This screen allows you to create a password for all the
settings described in this chapter as well as for editing
date/time and lot information (if password protected).
The setup password ensures that only authorized persons
can make changes to the setup.
1 Use the keypad to enter the password.
2 Touch to save the password and enable pass-
word protection
or
touch to exit this screen without saving any
changes. The display returns to the Main Menu.
Password protection will take effect only after the
next power on.
To disable password protection:
1 Open the Setup Menu (you must enter the current
password).
2 Touch Password.
3 Delete the current password by touching .
4 Touch to disable password protection.
Please note that password protection can only be reset
or modified after entering the current password. Proper
authentication is required to access the Setup Menu.
Store your password in a safe place.
123
456
789
A-O0
Setup Password
12:48 pm
03/17/17

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing