Accu-Chek Inform II User Manual

220
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
To add comments
1
:
14 In the result screen, touch .
15 Select the desired predefined comment(s) from the
display list (if configured)
or
touch to enter your own custom comment(s).
Use the keypad (as with login) to enter your
comment.
16 Once you have selected the desired comment(s),
touch to return to the results screen.
17 Touch to return to the Main Menu.
Warning messages The meter may display error or warning messages when
you enter Other Patient Tests and Other Control Tests.
These error or warning messages occur when the validity
of the recorded result is questionable. These messages
caution that test information may not be valid or accurate.
(See also “Pop-up messages” in Chapter 11)
When entering other patient and other control test
results, the user may be prompted to enter a control test
(control bar) result as either acceptable or not accept-
able. If the result is entered as not acceptable, subse-
quent patient results may not be valid due to the invalid
control bar result.
1. See also section “Adding comments” in Chapter 3.
Test results are also saved when the meter is powered
off in the results screen or automatically powers off.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing