Accu-Chek Inform II User Manual

124
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Installing the battery pack 1 Loosen the screws on the battery compartment cover
until they are protruding about 2/10 inch.
2 Hold the battery pack in your hand, with the wires
and the plug pinched between your thumb and
index finger.
3 Plug the connector plug into the socket.
4 Place the battery pack inside the battery compart-
ment as shown above.
To position the battery pack correctly, always align the
ridges on the side of the battery pack with the ridges on
the inside of the battery compartment.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing