Accu-Chek Inform II User Manual

178
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Information about software
licenses
This product incorporates software modules developed
under open source licenses. The source code of this soft-
ware can be requested on a standard data exchange
medium from the manufacturer at the following address:
Roche Diagnostics GmbH
Sandhofer Str. 116
68305 Mannheim
Germany
The complete license agreements are stored as a text file
(file name “license.pdf”) on the Accu-Chek Inform II Base
Unit of the Accu-Chek Inform II system. The file
“license.pdf” is located in the same folder as the PDF file
“ROCHE BU Technical Note UDS5”.
1
You can access these files by connecting the Accu-Chek
Inform II Base Unit to a PC with the USB cable. For
detailed instructions on how to do this, see the instruction
sheet “Setting Up the Base Unit” included in the
Accu-Chek Inform II Base Unit Kit.
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
1. On legacy base units the respective PDF file is called
“ROCHE HBU-BU-BUH Technical Note”.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing