Accu-Chek Inform II User Manual

Linearity Testing • 7
107
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Confirming or selecting the lot
number for linearity test kits
You are now prompted to confirm or enter the lot number
of the linearity test kit. Compare the number displayed by
the meter to the number on the label of the linearity test
kit.
3 If you want to use the preselected number dis-
played by the meter, touch to confirm.
To use a different number than the lot number dis-
played, touch to open the keypad and enter
the number manually (see page 99).
Confirming or selecting the test
strip lot
Once you have entered and confirmed the lot number of
the linearity test kit, you are asked to choose the lot
number of the test strips. Compare the number displayed
by the meter to the number on the label of the test strip
vial.
4 Select the test strip lot number as follows:
To read the test strip lot number from the test strip
vial via barcode scanner, press and release .
Follow the instructions for scanning IDs.
To use the preselected number displayed by the
meter, touch to confirm.
To use a different number than the lot number dis-
played, touch to select the number from a list,
enter the number manually via keypad, or use the
barcode scanner to enter the lot number (see
page 87).
Touch to confirm the selected test strip lot
number.
Linearity Test
12345678?
Use Linearity L
ot
12:48 pm
03/17/17
Linearity Test
Linearity 12345678
Use Strip L
ot
12:48 pm
123456?
03/17/17

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing