Accu-Chek Inform II

Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter • 6
91
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Editing test strip data As mentioned at the beginning of this chapter, you can
edit several parameters for test strips, the expiration date
and the value ranges for control solutions.
1 Use the keypad to enter the desired expiration date
(use two digits and leading zero, if necessary). It is
not possible to enter a date beyond the expiration
date stored in the key.
2 Touch to accept the modified date and con-
tinue to the value ranges.
Add Strip Lot
Strip Lot Confi rmation
D-530: Do you want to
use the suggested
v
alues for strip 545603?
Use by: 12/10/17
L1(Lo): 43-74 mg/dL
L2(Hi): 288-389 mg/dL
12:48 pm
03/17/17
123
456
789
0
Strip Expiration
05/30/17
12:48 pm
03/17/17