Accu-Chek Inform II

Appendix for Accu-Chek Inform II Base Unit (legacy version) • F
235
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
F Appendix for Accu-Chek Inform II Base Unit (legacy
version)
The legacy version of the Accu-Chek Inform II Base Unit
(REF 05060290001) differs in some technical aspects
from the newer Accu-Chek Inform II Base Unit
(REF 07671717190) that is described in section 1.6 “Over-
view of the Accu-Chek Inform II Base Unit”. This chapter
describes the elements and technical data of the legacy
base unit version with older hardware.
F.1 Overview of the base unit with older hardware
The Accu-Chek Inform II Base Unit (legacy version) can:
■ charge the meter battery pack.
■ communicate with a data management system.
■ communicate with a computer.
The base unit has the following elements:
1 Charging contacts
2 Infrared window for communication with the meter
3 Status LED (lights up when power is connected):
–
Lights up red: Power supply is connected, applica-
tion is starting up
– Lights up green: Ready
– Flashes red: Error
– Lights up blue: Configuration mode
2
1
3