Accu-Chek Inform II User Manual

Patient Glucose Testing • 3
65
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
If comments are not set as required and you do not wish
to add a comment to the test result, touch to return
to the Main Menu.
Remove the test strip and dispose of it in accordance with
applicable regulations and directives for disposal of
potentially infectious samples and materials.
Adding comments You can add up to three comments to a test result.
Comments can provide, for example, additional
information about the test conditions or the patient.
The meter can be configured so that comments are
always required, required depending on the result range,
optional, or disabled. You can call up the function for
adding comments directly in the results screen. If com-
ments are set as required, the meter will not accept an
empty comment field.
Test results are saved automatically if the meter is pow-
ered off or if it powers itself off after 10 minutes of inac-
tivity/no screen touches (see “Automatic power-off” on
page 22).
Of these three comments only one can be a custom
comment; the others can be selected from the prede-
fined comments list.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing