Accu-Chek Inform II User Manual

46
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Entering the operator ID
manually
When the screen for entering the operator ID is
displayed:
1 Touch the letters or numbers to enter the ID.
2 Use the following buttons to toggle between ranges
of characters:
– for letters A-O
– for letters P-Z, period and hyphen
– for numbers 0-9
3 Touch to backspace and delete a character
entered incorrectly. Touch to delete the whole
entry. Touch to enter a space.
4 Touch to confirm.
If the operator ID you have entered is not valid (or the
operator is not stored in the meter), an error message is
displayed. Confirming the message allows you to enter
the ID again.
Entering a password Once the operator ID has been entered correctly, a
screen for entering a password may appear (if config-
ured). Enter the password manually in the same manner
as described above for the operator ID.
Once all entries are complete, the Main Menu appears.
123
456
789
A-O0
Operator ID
12:48 pm
03/17/17
ABCDE
FGH I J
KLMNO
P-Z123
Operator ID
MARIA
12:48 pm
03/17/17
PQRST
UVWXY
Z.
123 A-O
Operator ID
MARIA S.
12:48 pm
-
03/17/17
A-O
P-Z
123

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing